My friends who have two computers in the family don't know how much, some are the previous old machines that cannot be upgraded, and the index add new machine, and more is the use of laptops. The biggest advantage of laptop is that mobility is particularly good, that is, it is convenient, which is equivalent to a platform that has a job, entertainment, but if you want to exchange data between laptops and desktops, what can you consider? First, the two-machine interconnection is 1, the floppy disk is copied as the file, and the copy is of course the most economical with the floppy disk. . 2, NIC connection network card connection, many people will first think of this trick. Unfortunately, not every laptop is built in the network card; let alone who knows if there is a network card in the desktop; there is also a network cable production, my god, can be cumbersome! 3, serial port / parallel line connection This is not too much to say, one is not too convenient, the second is too slow, I am afraid you will be unbearable. 4, mobile storage equipment is more and more applications such as ZIP, Mo, and CD-RW, but prices are not applicable to general friends, and through these third-party media fell, Not worrying. 5, USB cable connection This is the most easily connected to the author to recommend the most simple-parallel-connected method: USB cable. It uses the dedicated USB cable to connect to the USB port of the two computers and then achieve data exchange, not only the transmission rate is much larger as the traditional serial port / parallel port (up to 6MB / s, in general, more than 4MB / s), And it is true, you are cool enough! Second, the USB online actual combat, the author takes the BF-100C USB online line (Direct-linq) laptop and desktop laptop launched by Taiwan BAFO technology, introducing the actual combat process: 1. Check the system to configure this BF -100C requires not high requirements, as long as the CPU 486DX4-100 configuration is met (of course, there is a need for a USB interface), as for the operating system, Win9X / ME / 2000 / XP can be (this article is WinXP as an example). What is even more is, it also supports IMAC's G3, G4, IBOOK, but requires Mac OS8.5 or more. 2. Plug the USB connection is used for the USB cable of the dual-machine interconnection and the ordinary USB line. It has a USB plug on both ends. There is a small "package" in the middle of the connection. There is a chip in it. To achieve online features. The operation of installing the USB connection is very simple, because the USB device supports hot swapping, so that it is installed without shutdown, insert the USB plug to the USB interface of the two computers, WinXP automatically detects new hardware. 3. Installing the driver When the USB cable is plugged in and detected, the system will enter "find new hardware wizard", the author chooses "from the list or specified location installation" mode, then select the corresponding software disk according to the prompt. A good driver. When the driver installation is over, you can check it in "Device Manager", you can see a new device called "USB Bridge Cable", which proves to be installed! 4, install the application, please note that if only the driver that only installs the USB cable is unable to implement two computers exchange data, you must have a application called "PC-Linq", and its installation is The driver is automatically performed after the installation is installed, and the default operation can be selected.
